surfaceMeshConvert.C

Go to the documentation of this file.

/*---------------------------------------------------------------------------*\
  =========                 |
  \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
   \\    /   O peration     |
    \\  /    A nd           | www.openfoam.com
     \\/     M anipulation  |
-------------------------------------------------------------------------------
    Copyright (C) 2011-2016 OpenFOAM Foundation
    Copyright (C) 2018-2020 OpenCFD Ltd.
-------------------------------------------------------------------------------
License
    This file is part of OpenFOAM.
 
    OpenFOAM is free software: you can redistribute it and/or modify it
    under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.
 
    OpenFOAM is distributed in the hope that it will be useful, but WITHOUT
    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
    FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
    for more details.
 
    You should have received a copy of the GNU General Public License
    along with OpenFOAM.  If not, see <http://www.gnu.org/licenses/>.
 
Application
    surfaceMeshConvert
 
Group
    grpSurfaceUtilities
 
Description
    Convert between surface formats with optional scaling or
    transformations (rotate/translate) on a coordinateSystem.
 
Usage
    \b surfaceMeshConvert inputFile outputFile [OPTION]
 
    Options:
      - \par -clean
        Perform some surface checking/cleanup on the input surface.
 
      - \par -read-format <type>
        The input file format (default: use file extension)
 
      - \par -write-format <type>
        The output file format (default: use file extension)
 
      - \par -read-scale <scale>
        Input geometry scaling factor.
 
      - \par -write-scale <scale>
        Output geometry scaling factor.
 
      - \par -dict <dictionary>
        Alternative dictionary for constant/coordinateSystems.
 
      - \par -from <coordinateSystem>
        Apply specified coordinate system after reading file.
 
      - \par -to <coordinateSystem>
        Apply specified coordinate system before writing file.
 
      - \par -tri
        Triangulate surface.
 
Note
    The filename extensions are used to determine the default file formats.
 
\*---------------------------------------------------------------------------*/
 
#include "argList.H"
#include "Time.H"
 
#include "MeshedSurfaces.H"
#include "coordinateSystems.H"
#include "cartesianCS.H"
 
using namespace Foam;
 
static word getExtension(const fileName& name)
{
    word ext(name.ext());
    if (ext == "gz")
    {
        ext = name.lessExt().ext();
    }
 
    return ext;
}
 
// Non-short-circuiting check to get all warnings
static bool hasReadWriteTypes(const word& readType, const word& writeType)
{
    volatile bool good = true;
 
    if (!meshedSurface::canReadType(readType, true))
    {
        good = false;
    }
 
    if (!meshedSurface::canWriteType(writeType, true))
    {
        good = false;
    }
 
    return good;
}
 
 
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
 
int main(int argc, char *argv[])
{
    argList::addNote
    (
        "Convert between surface formats, using MeshSurface library components"
    );
 
    argList::noParallel();
    argList::addArgument("input", "The input surface file");
    argList::addArgument("output", "The output surface file");
 
    argList::addBoolOption
    (
        "clean",
        "Perform some surface checking/cleanup on the input surface"
    );
    argList::addOption
    (
        "read-format",
        "type",
        "Input format (default: use file extension)"
    );
    argList::addOption
    (
        "write-format",
        "type",
        "Output format (default: use file extension)"
    );
    argList::addOption
    (
        "read-scale",
        "factor",
        "Input geometry scaling factor"
    );
    argList::addOption
    (
        "write-scale",
        "factor",
        "Output geometry scaling factor"
    );
 
    argList::addOptionCompat("read-scale", {"scaleIn", 1912});
    argList::addOptionCompat("write-scale", {"scaleOut", 1912});
 
    argList::addOption("dict", "file", "Alternative coordinateSystems");
 
    argList::addOption
    (
        "from",
        "system",
        "The source coordinate system, applied after '-read-scale'",
        true // advanced
    );
    argList::addOption
    (
        "to",
        "system",
        "The target coordinate system, applied before '-write-scale'",
        true // advanced
    );
    argList::addBoolOption
    (
        "tri",
        "Triangulate surface"
    );
 
 
    argList args(argc, argv);
    Time runTime(args.rootPath(), args.caseName());
 
    const fileName importName(args[1]);
    const fileName exportName(args[2]);
 
    if (importName == exportName)
    {
        FatalError
            << "Output file would overwrite input file."
            << exit(FatalError);
    }
 
    const word readFileType
    (
        args.getOrDefault<word>("read-format", getExtension(importName))
    );
 
    const word writeFileType
    (
        args.getOrDefault<word>("write-format", getExtension(exportName))
    );
 
 
    // Check that reading/writing is supported
    if (!hasReadWriteTypes(readFileType, writeFileType))
    {
        FatalError
            << "Unsupported file format(s)" << nl
            << exit(FatalError);
    }
 
 
    scalar scaleFactor(0);
 
    // The coordinate transformations (must be cartesian)
    autoPtr<coordSystem::cartesian> fromCsys;
    autoPtr<coordSystem::cartesian> toCsys;
 
    if (args.found("from") || args.found("to"))
    {
        IOobject ioCsys = IOobject::selectIO
        (
            IOobject
            (
                coordinateSystems::typeName,
                runTime.constant(),
                runTime,
                IOobject::MUST_READ,
                IOobject::NO_WRITE,
                false
            ),
            args.getOrDefault<fileName>("dict", "")
        );
 
        if (!ioCsys.typeHeaderOk<coordinateSystems>(false))
        {
            FatalError
                << "Cannot open coordinateSystems file\n    "
                << ioCsys.objectPath() << nl
                << exit(FatalError);
        }
 
        coordinateSystems globalCoords(ioCsys);
 
        if (args.found("from"))
        {
            const word csName(args["from"]);
            const auto* csPtr = globalCoords.cfind(csName);
 
            if (!csPtr)
            {
                FatalError
                    << "Cannot find -from " << csName << nl
                    << "available coordinateSystems: "
                    << flatOutput(globalCoords.names()) << nl
                    << exit(FatalError);
            }
 
            fromCsys = autoPtr<coordSystem::cartesian>::New(*csPtr);
        }
 
        if (args.found("to"))
        {
            const word csName(args["to"]);
            const auto* csPtr = globalCoords.cfind(csName);
 
            if (!csPtr)
            {
                FatalError
                    << "Cannot find -to " << csName << nl
                    << "available coordinateSystems: "
                    << flatOutput(globalCoords.names()) << nl
                    << exit(FatalError);
            }
 
            toCsys = autoPtr<coordSystem::cartesian>::New(*csPtr);
        }
 
        // Maybe fix this later
        if (fromCsys && toCsys)
        {
            FatalError
                << "Only allowed '-from' or '-to' option at the moment."
                << exit(FatalError);
        }
    }
 
 
    {
        meshedSurface surf(importName, readFileType);
 
        if (args.readIfPresent("read-scale", scaleFactor) && scaleFactor > 0)
        {
            Info<< "scale input " << scaleFactor << nl;
            surf.scalePoints(scaleFactor);
        }
 
        if (args.found("clean"))
        {
            surf.cleanup(true);
        }
 
        if (fromCsys)
        {
            Info<< "move points from coordinate system: "
                << fromCsys->name() << nl;
            tmp<pointField> tpf = fromCsys->localPosition(surf.points());
            surf.movePoints(tpf());
        }
 
        if (toCsys)
        {
            Info<< "move points to coordinate system: "
                << toCsys->name() << nl;
            tmp<pointField> tpf = toCsys->globalPosition(surf.points());
            surf.movePoints(tpf());
        }
 
        if (args.readIfPresent("write-scale", scaleFactor) && scaleFactor > 0)
        {
            Info<< "scale output " << scaleFactor << nl;
            surf.scalePoints(scaleFactor);
        }
 
        if (args.found("tri"))
        {
            Info<< "triangulate" << nl;
            surf.triangulate();
        }
 
        Info<< "writing " << exportName;
        surf.write(exportName, writeFileType);
    }
 
    Info<< "\nEnd\n" << endl;
 
    return 0;
}
 
// ************************************************************************* //