Kinematic form of single-cell layer surface film model. More...
Public Member Functions | |
| TypeName ("kinematicSingleLayer") | |
| Runtime type information. More... | |
| kinematicSingleLayer (const word &modelType, const fvMesh &mesh, const dimensionedVector &g, const word ®ionType, const bool readFields=true) | |
| Construct from components. More... | |
| virtual | ~kinematicSingleLayer () |
| Destructor. More... | |
| virtual scalar | CourantNumber () const |
| Courant number evaluation. More... | |
| Switch | momentumPredictor () const |
| Return the momentum predictor. More... | |
| label | nOuterCorr () const |
| Return the number of outer correctors. More... | |
| label | nCorr () const |
| Return the number of PISO correctors. More... | |
| label | nNonOrthCorr () const |
| Return the number of non-orthogonal correctors. More... | |
| const dimensionedScalar & | deltaSmall () const |
| Return small delta. More... | |
| const volScalarField & | mu () const |
| Return const access to the dynamic viscosity [Pa.s]. More... | |
| const volScalarField & | sigma () const |
| Return const access to the surface tension [kg/s2]. More... | |
| const volScalarField & | delta () const |
| Return const access to the film thickness [m]. More... | |
| const volScalarField & | alpha () const |
| Return the film coverage, 1 = covered, 0 = uncovered []. More... | |
| virtual const volVectorField & | U () const |
| Return the film velocity [m/s]. More... | |
| virtual const volVectorField & | Us () const |
| Return the film surface velocity [m/s]. More... | |
| virtual const volVectorField & | Uw () const |
| Return the film wall velocity [m/s]. More... | |
| virtual const volScalarField & | deltaRho () const |
| Return the film thickness*density (helper field) [kg/m3]. More... | |
| virtual const surfaceScalarField & | phi () const |
| Return the film flux [kg.m/s]. More... | |
| virtual const volScalarField & | rho () const |
| Return the film density [kg/m3]. More... | |
| virtual const volScalarField & | T () const |
| Return the film mean temperature [K]. More... | |
| virtual const volScalarField & | Ts () const |
| Return the film surface temperature [K]. More... | |
| virtual const volScalarField & | Tw () const |
| Return the film wall temperature [K]. More... | |
| virtual const volScalarField & | hs () const |
| Return the film surface enthalpy [J/kg]. More... | |
| virtual const volScalarField & | Cp () const |
| Return the film specific heat capacity [J/kg/K]. More... | |
| virtual const volScalarField & | kappa () const |
| Return the film thermal conductivity [W/m/K]. More... | |
| virtual tmp< volScalarField > | primaryMassTrans () const |
| Return mass transfer source - Eulerian phase only. More... | |
| virtual const volScalarField & | cloudMassTrans () const |
| Return the film mass available for transfer to cloud. More... | |
| virtual const volScalarField & | cloudDiameterTrans () const |
| Return the parcel diameters originating from film to cloud. More... | |
| virtual void | addSources (const label patchi, const label facei, const scalar massSource, const vector &momentumSource, const scalar pressureSource, const scalar energySource=0) |
| External hook to add sources to the film. More... | |
| volVectorField & | USpPrimary () |
| Momentum [kg/m/s2]. More... | |
| volScalarField & | pSpPrimary () |
| Pressure [Pa]. More... | |
| volScalarField & | rhoSpPrimary () |
| Mass [kg/m2/s]. More... | |
| volVectorField & | USp () |
| Momentum [kg/m/s2]. More... | |
| volScalarField & | pSp () |
| Pressure [Pa]. More... | |
| volScalarField & | rhoSp () |
| Mass [kg/m2/s]. More... | |
| const volVectorField & | USp () const |
| Momentum [kg/m/s2]. More... | |
| const volScalarField & | pSp () const |
| Pressure [Pa]. More... | |
| const volScalarField & | rhoSp () const |
| Mass [kg/m2/s]. More... | |
| const volVectorField & | UPrimary () const |
| Velocity [m/s]. More... | |
| const volScalarField & | pPrimary () const |
| Pressure [Pa]. More... | |
| const volScalarField & | rhoPrimary () const |
| Density [kg/m3]. More... | |
| const volScalarField & | muPrimary () const |
| Viscosity [Pa.s]. More... | |
| const filmThermoModel & | filmThermo () const |
| Film thermo. More... | |
| injectionModelList & | injection () |
| Injection. More... | |
| transferModelList & | transfer () |
| Transfer. More... | |
| const filmTurbulenceModel & | turbulence () const |
| Turbulence. More... | |
| tmp< volScalarField > | mass () const |
| Return the current film mass. More... | |
| tmp< volScalarField > | deltaMass () const |
| Return the change in film mass due to sources/sinks. More... | |
| tmp< volScalarField > | gNorm () const |
| Return the gravity normal-to-patch component contribution. More... | |
| tmp< volScalarField > | gNormClipped () const |
| Return the gravity normal-to-patch component contribution. More... | |
| tmp< volVectorField > | gTan () const |
| Return the gravity tangential component contributions. More... | |
| tmp< vectorField > | gTan (const label patchI) const |
| Return the gravity tangential component contributions for patchI. More... | |
| virtual void | preEvolveRegion () |
| Pre-evolve film hook. More... | |
| virtual void | evolveRegion () |
| Evolve the film equations. More... | |
| virtual void | postEvolveRegion () |
| Post-evolve film hook. More... | |
| virtual tmp< volScalarField::Internal > | Srho () const |
| Return total mass source - Eulerian phase only. More... | |
| virtual tmp< volScalarField::Internal > | Srho (const label i) const |
| Return mass source for specie i - Eulerian phase only. More... | |
| virtual tmp< volScalarField::Internal > | Sh () const |
| Return enthalpy source - Eulerian phase only. More... | |
| virtual void | info () |
| Provide some feedback. More... | |
 Public Member Functions inherited from surfaceFilmRegionModel | |
| TypeName ("surfaceFilmRegionModel") | |
| Runtime type information. More... | |
| surfaceFilmRegionModel (const word &modelType, const fvMesh &mesh, const dimensionedVector &g, const word ®ionType) | |
| Construct from type name, mesh and gravity vector. More... | |
| virtual | ~surfaceFilmRegionModel () |
| Destructor. More... | |
| const dimensionedVector & | g () const |
| Return the acceleration due to gravity. More... | |
| virtual void | evolve () |
| Main driver routing to evolve the region - calls other evolves. More... | |
| Public Member Functions inherited from surfaceFilmModel | |
| TypeName ("surfaceFilmModel") | |
| Runtime type information. More... | |
| declareRunTimeSelectionTable (autoPtr, surfaceFilmModel, mesh,(const word &modelType, const fvMesh &mesh, const dimensionedVector &g, const word ®ionType),(modelType, mesh, g, regionType)) | |
| surfaceFilmModel () | |
| Constructor. More... | |
| virtual | ~surfaceFilmModel () |
| Destructor. More... | |
| Public Member Functions inherited from singleLayerRegion | |
| TypeName ("regionModel") | |
| Runtime type information. More... | |
| singleLayerRegion (const fvMesh &mesh, const word ®ionType) | |
| Construct null. More... | |
| singleLayerRegion (const fvMesh &mesh, const word ®ionType, const word &modelName, bool readFields=true) | |
| Construct from mesh, region type and name. More... | |
| virtual | ~singleLayerRegion () |
| Destructor. More... | |
| virtual const volVectorField & | nHat () const |
| Return the patch normal vectors. More... | |
| virtual const volScalarField & | magSf () const |
| Return the face area magnitudes / [m2]. More... | |
| virtual const labelList & | passivePatchIDs () const |
| Return the list of patch IDs opposite to internally. More... | |
| template<class Type > | |
| wordList | mappedFieldAndInternalPatchTypes () const |
| Return boundary types for mapped field patches. More... | |
| template<class Type > | |
| wordList | mappedPushedFieldPatchTypes () const |
| Return boundary types for pushed mapped field patches. More... | |
| template<class Type > | |
| Foam::wordList | mappedFieldAndInternalPatchTypes () const |
| template<class Type > | |
| Foam::wordList | mappedPushedFieldPatchTypes () const |
| Public Member Functions inherited from regionModel | |
| TypeName ("regionModel") | |
| Runtime type information. More... | |
| regionModel (const fvMesh &mesh, const word ®ionType) | |
| Construct null. More... | |
| regionModel (const fvMesh &mesh, const word ®ionType, const word &modelName, bool readFields=true) | |
| Construct from mesh, region type and name. More... | |
| regionModel (const fvMesh &mesh, const word ®ionType, const word &modelName, const dictionary &dict, bool readFields=true) | |
| Construct from mesh and name and dict. More... | |
| virtual | ~regionModel ()=default |
| Destructor. More... | |
| const fvMesh & | primaryMesh () const |
| Return the reference to the primary mesh database. More... | |
| const Time & | time () const |
| Return the reference to the time database. More... | |
| Switch | active () const |
| Return the active flag. More... | |
| Switch | infoOutput () const |
| Return the information flag. More... | |
| const word & | modelName () const |
| Return the model name. More... | |
| const fvMesh & | regionMesh () const |
| Return the region mesh database. More... | |
| fvMesh & | regionMesh () |
| Return the region mesh database for manipulation. More... | |
| const dictionary & | coeffs () const |
| Return the model coefficients dictionary. More... | |
| const dictionary & | solution () const |
| Return the solution dictionary. More... | |
| const IOdictionary & | outputProperties () const |
| Return const access to the output properties dictionary. More... | |
| IOdictionary & | outputProperties () |
| Return output properties dictionary. More... | |
| bool | isCoupledPatch (const label regionPatchi) const |
| Return true if patchi on the local region is a coupled. More... | |
| bool | isRegionPatch (const label primaryPatchi) const |
| Return true if patchi on the primary region is a coupled. More... | |
| const labelList & | primaryPatchIDs () const |
| Return the list of patch IDs on the primary region coupled. More... | |
| const labelList & | intCoupledPatchIDs () const |
| Return the list of patch IDs internally coupled with the. More... | |
| label | regionPatchID (const label primaryPatchID) const |
| Return region ID corresponding to primaryPatchID. More... | |
| label | nbrCoupledPatchID (const regionModel &nbrRegion, const label regionPatchi) const |
| Return the coupled patch ID paired with coupled patch. More... | |
| template<class Type > | |
| tmp< Foam::Field< Type > > | mapRegionPatchField (const regionModel &nbrRegion, const label regionPatchi, const label nbrPatchi, const Field< Type > &nbrField, const bool flip=false) const |
| Map patch field from another region model to local patch. More... | |
| template<class Type > | |
| tmp< Field< Type > > | mapRegionPatchField (const regionModel &nbrRegion, const word &fieldName, const label regionPatchi, const bool flip=false) const |
| Map patch field from another region model to local patch. More... | |
| template<class Type > | |
| tmp< Field< Type > > | mapRegionPatchInternalField (const regionModel &nbrRegion, const word &fieldName, const label regionPatchi, const bool flip=false) const |
| Map patch internal field from another region model to local. More... | |
| template<class Type > | |
| void | toPrimary (const label regionPatchi, List< Type > ®ionField) const |
| Convert a local region field to the primary region. More... | |
| template<class Type > | |
| void | toRegion (const label regionPatchi, List< Type > &primaryFieldField) const |
| Convert a primary region field to the local region. More... | |
| template<class Type , class CombineOp > | |
| void | toPrimary (const label regionPatchi, List< Type > ®ionField, const CombineOp &cop) const |
| Convert a local region field to the primary region with op. More... | |
| template<class Type , class CombineOp > | |
| void | toRegion (const label regionPatchi, List< Type > &primaryFieldField, const CombineOp &cop) const |
| Convert a primary region field to the local region with op. More... | |
| template<class Type > | |
| Foam::tmp< Foam::Field< Type > > | mapRegionPatchField (const regionModel &nbrRegion, const label regionPatchi, const label nbrPatchi, const Field< Type > &nbrField, const bool flip) const |
| template<class Type > | |
| Foam::tmp< Foam::Field< Type > > | mapRegionPatchField (const regionModel &nbrRegion, const word &fieldName, const label regionPatchi, const bool flip) const |
| template<class Type > | |
| Foam::tmp< Foam::Field< Type > > | mapRegionPatchInternalField (const regionModel &nbrRegion, const word &fieldName, const label regionPatchi, const bool flip) const |
| Public Member Functions inherited from IOdictionary | |
| IOdictionary (const IOobject &) | |
| Construct given an IOobject. More... | |
| IOdictionary (const IOobject &, const dictionary &) | |
| Construct given an IOobject and dictionary. More... | |
| IOdictionary (const IOobject &, Istream &) | |
| Construct given an IOobject and Istream. More... | |
| virtual | ~IOdictionary () |
| Destructor. More... | |
| virtual bool | global () const |
| Is object global. More... | |
| virtual fileName | filePath () const |
| Return complete path + object name if the file exists. More... | |
| Public Member Functions inherited from baseIOdictionary | |
| TypeName ("dictionary") | |
| Declare type-name, virtual type (with debug switch) More... | |
| baseIOdictionary (const baseIOdictionary &)=default | |
| Copy construct. More... | |
| baseIOdictionary (baseIOdictionary &&)=default | |
| Move construct. More... | |
| virtual | ~baseIOdictionary ()=default |
| Destructor. More... | |
| baseIOdictionary (const IOobject &) | |
| Construct given an IOobject. More... | |
| baseIOdictionary (const IOobject &, const dictionary &) | |
| Construct given an IOobject and dictionary. More... | |
| baseIOdictionary (const IOobject &, Istream &) | |
| Construct given an IOobject and Istream. More... | |
| const word & | name () const |
| virtual bool | readData (Istream &) |
| The readData function required by regIOobject read operation. More... | |
| virtual bool | writeData (Ostream &) const |
| The writeData function required by regIOobject write operation. More... | |
| void | operator= (const baseIOdictionary &) |
| Copy assignment of dictionary entries (leave regIOobject untouched) More... | |
| void | operator= (const dictionary &rhs) |
| Copy assignment of dictionary entries. More... | |
| Public Member Functions inherited from regIOobject | |
| TypeName ("regIOobject") | |
| Runtime type information. More... | |
| regIOobject (const IOobject &io, const bool isTime=false) | |
| regIOobject (const regIOobject &rio) | |
| Copy construct. More... | |
| regIOobject (const regIOobject &rio, bool registerCopy) | |
| regIOobject (const word &newName, const regIOobject &, bool registerCopy) | |
| regIOobject (const IOobject &io, const regIOobject &rio) | |
| Copy construct with new IO parameters. More... | |
| virtual | ~regIOobject () |
| Destructor. More... | |
| bool | checkIn () |
| Add object to registry, if not already registered. More... | |
| bool | checkOut () |
| Remove all file watches and remove object from registry. More... | |
| virtual void | addWatch () |
| Add file watch on object (if registered and READ_IF_MODIFIED) More... | |
| bool | ownedByRegistry () const |
| Is this object owned by the registry? More... | |
| bool | store () |
| void | release (const bool unregister=false) |
| Release ownership of this object from its registry. More... | |
| label | eventNo () const |
| Event number at last update. More... | |
| label & | eventNo () |
| Event number at last update. More... | |
| bool | upToDate (const regIOobject &) const |
| Return true if up-to-date with respect to given object. More... | |
| bool | upToDate (const regIOobject &, const regIOobject &) const |
| Return true if up-to-date with respect to given objects. More... | |
| bool | upToDate (const regIOobject &, const regIOobject &, const regIOobject &) const |
| Return true if up-to-date with respect to given objects. More... | |
| bool | upToDate (const regIOobject &, const regIOobject &, const regIOobject &, const regIOobject &) const |
| Return true if up-to-date with respect to given objects. More... | |
| void | setUpToDate () |
| Set as up-to-date. More... | |
| virtual void | rename (const word &newName) |
| Rename. More... | |
| bool | headerOk () |
| Read and check header info. More... | |
| Istream & | readStream (const word &, const bool valid=true) |
| Return Istream and check object type against that given. More... | |
| void | close () |
| Close Istream. More... | |
| virtual label | addWatch (const fileName &) |
| Add file watch for fileName on object if not yet watched. More... | |
| const labelList & | watchIndices () const |
| Return file-monitoring handles. More... | |
| labelList & | watchIndices () |
| Return file-monitoring handles. More... | |
| virtual bool | modified () const |
| virtual bool | readIfModified () |
| Read object if modified (as set by call to modified) More... | |
| virtual bool | writeObject (IOstreamOption streamOpt, const bool valid) const |
| Write using stream options. More... | |
| virtual bool | write (const bool valid=true) const |
| Write using setting from DB. More... | |
| void | operator= (const IOobject &io) |
| Copy assignment. More... | |
| virtual bool | writeObject (IOstream::streamFormat fmt, IOstream::versionNumber ver, IOstream::compressionType comp, const bool valid) const |
| Write using given format, version and compression. More... | |
| Public Member Functions inherited from IOobject | |
| TypeName ("IOobject") | |
| Declare type-name, virtual type (with debug switch) More... | |
| IOobject (const IOobject &)=default | |
| Copy construct. More... | |
| virtual | ~IOobject ()=default |
| Destructor. More... | |
| IOobject (const word &name, const fileName &instance, const objectRegistry ®istry, readOption r=NO_READ, writeOption w=NO_WRITE, bool registerObject=true) | |
| Construct from name, instance, registry, io options. More... | |
| IOobject (const word &name, const fileName &instance, const fileName &local, const objectRegistry ®istry, readOption r=NO_READ, writeOption w=NO_WRITE, bool registerObject=true, bool globalObject=false) | |
| Construct from name, instance, local, registry, io options. More... | |
| IOobject (const fileName &path, const objectRegistry ®istry, readOption r=NO_READ, writeOption w=NO_WRITE, bool registerObject=true, bool globalObject=false) | |
| Construct from path, registry, io options. More... | |
| IOobject (const IOobject &io, const objectRegistry ®istry) | |
| Copy construct, resetting registry. More... | |
| IOobject (const IOobject &io, const word &name) | |
| Copy construct, resetting name. More... | |
| autoPtr< IOobject > | clone () const |
| Clone. More... | |
| autoPtr< IOobject > | clone (const objectRegistry ®istry) const |
| Clone resetting registry. More... | |
| const objectRegistry & | db () const |
| Return the local objectRegistry. More... | |
| const Time & | time () const |
| Return time. More... | |
| const word & | name () const |
| Return name. More... | |
| const word & | headerClassName () const |
| Return name of the class name read from header. More... | |
| word & | headerClassName () |
| Return non-constant access to the class name read from header. More... | |
| const string & | note () const |
| Return the optional note. More... | |
| string & | note () |
| Return non-constant access to the optional note. More... | |
| bool | registerObject () const |
| Should object created with this IOobject be registered? More... | |
| bool & | registerObject () |
| Should object created with this IOobject be registered? More... | |
| bool | globalObject () const |
| Is object same for all processors? More... | |
| bool & | globalObject () |
| Is object same for all processors? More... | |
| unsigned | labelByteSize () const |
| The label byte-size, possibly read from the header. More... | |
| unsigned | scalarByteSize () const |
| The scalar byte-size, possibly read from the header. More... | |
| bool | isHeaderClassName (const word &clsName) const |
| Test if headerClassName() equals the given class name. More... | |
| template<class Type > | |
| bool | isHeaderClassName () const |
| Test if headerClassName() equals Type::typeName. More... | |
| readOption | readOpt () const |
| The read option. More... | |
| readOption & | readOpt () |
| Non-constant access to the read option. More... | |
| writeOption | writeOpt () const |
| The write option. More... | |
| writeOption & | writeOpt () |
| Non-constant access to the write option. More... | |
| word | group () const |
| Return group (extension part of name) More... | |
| word | member () const |
| Return member (name without the extension) More... | |
| const fileName & | rootPath () const |
| const fileName & | caseName () const |
| const fileName & | instance () const |
| fileName & | instance () |
| const fileName & | local () const |
| fileName | path () const |
| The complete path. More... | |
| fileName | path (const word &instance, const fileName &local=fileName::null) const |
| The complete path with alternative instance and local. More... | |
| fileName | objectPath () const |
| The complete path + object name. More... | |
| fileName | localFilePath (const word &typeName, const bool search=true) const |
| Helper for filePath that searches locally. More... | |
| fileName | globalFilePath (const word &typeName, const bool search=true) const |
| Helper for filePath that searches up if in parallel. More... | |
| bool | readHeader (Istream &is) |
| Read header. More... | |
| template<class Type > | |
| bool | typeHeaderOk (const bool checkType=true, const bool search=true, const bool verbose=true) |
| Read header (uses typeFilePath to find file) and check its info. More... | |
| template<class Type > | |
| void | warnNoRereading () const |
| Helper: warn that type does not support re-reading. More... | |
| bool | writeHeader (Ostream &os) const |
| Write header. More... | |
| bool | writeHeader (Ostream &os, const word &objectType) const |
| Write header. Allow override of type. More... | |
| bool | good () const |
| bool | bad () const |
| InfoProxy< IOobject > | info () const |
| Return info proxy. More... | |
| void | operator= (const IOobject &io) |
| template<> | |
| bool | isHeaderClassName () const |
Specialization for void always returns true (no headerClassName check). More... | |
| template<class StringType > | |
| Foam::word | groupName (StringType base, const word &group) |
| template<class StringType > | |
| Foam::word | scopedName (StringType scope, const word &name) |
| Public Member Functions inherited from dictionary | |
| ClassName ("dictionary") | |
| dictionary () | |
| Construct top-level dictionary null. More... | |
| dictionary (const fileName &name) | |
| Construct top-level empty dictionary with given name. More... | |
| dictionary (const fileName &name, const dictionary &parentDict, Istream &is, bool keepHeader=false) | |
| dictionary (Istream &is) | |
| dictionary (Istream &is, bool keepHeader) | |
| dictionary (const dictionary &parentDict, const dictionary &dict) | |
| Copy construct given the parent dictionary. More... | |
| dictionary (const dictionary &dict) | |
| Copy construct top-level dictionary. More... | |
| dictionary (const dictionary *dict) | |
| Construct top-level dictionary as copy from pointer to dictionary. More... | |
| dictionary (const dictionary &parentDict, dictionary &&dict) | |
| Move construct for given parent dictionary. More... | |
| dictionary (dictionary &&dict) | |
| Move construct top-level dictionary. More... | |
| autoPtr< dictionary > | clone () const |
| Construct and return clone. More... | |
| virtual | ~dictionary () |
| Destructor. More... | |
| const fileName & | name () const |
| The dictionary name. More... | |
| fileName & | name () |
| The dictionary name for modification (use with caution). More... | |
| word | dictName () const |
| The local dictionary name (final part of scoped name) More... | |
| const dictionary & | parent () const |
| Return the parent dictionary. More... | |
| const dictionary & | topDict () const |
| Return the top of the tree. More... | |
| label | startLineNumber () const |
| Return line number of first token in dictionary. More... | |
| label | endLineNumber () const |
| Return line number of last token in dictionary. More... | |
| SHA1Digest | digest () const |
| Return the SHA1 digest of the dictionary contents. More... | |
| tokenList | tokens () const |
| Return the dictionary as a list of tokens. More... | |
| bool | found (const word &keyword, enum keyType::option matchOpt=keyType::REGEX) const |
| Search for an entry (const access) with the given keyword. More... | |
| entry * | findEntry (const word &keyword, enum keyType::option matchOpt=keyType::REGEX) |
| Find for an entry (non-const access) with the given keyword. More... | |
| const entry * | findEntry (const word &keyword, enum keyType::option matchOpt=keyType::REGEX) const |
| Find an entry (const access) with the given keyword. More... | |
| const entry * | findScoped (const word &keyword, enum keyType::option matchOpt=keyType::REGEX) const |
| Search for a scoped entry (const access) with the given keyword. More... | |
| dictionary * | findDict (const word &keyword, enum keyType::option matchOpt=keyType::REGEX) |
| Find and return a sub-dictionary pointer if present. More... | |
| const dictionary * | findDict (const word &keyword, enum keyType::option matchOpt=keyType::REGEX) const |
| Find and return a sub-dictionary pointer if present. More... | |
| const entry & | lookupEntry (const word &keyword, enum keyType::option matchOpt) const |
| Search for an entry (const access) with the given keyword. More... | |
| ITstream & | lookup (const word &keyword, enum keyType::option matchOpt=keyType::REGEX) const |
| template<class T > | |
| T | get (const word &keyword, enum keyType::option matchOpt=keyType::REGEX) const |
| template<class T > | |
| T | getOrDefault (const word &keyword, const T &deflt, enum keyType::option matchOpt=keyType::REGEX) const |
| template<class T > | |
| T | getOrAdd (const word &keyword, const T &deflt, enum keyType::option matchOpt=keyType::REGEX) |
| template<class T > | |
| bool | readEntry (const word &keyword, T &val, enum keyType::option matchOpt=keyType::REGEX, bool mandatory=true) const |
| template<class T > | |
| bool | readIfPresent (const word &keyword, T &val, enum keyType::option matchOpt=keyType::REGEX) const |
| template<class T , class Predicate > | |
| T | getCheck (const word &keyword, const Predicate &pred, enum keyType::option matchOpt=keyType::REGEX) const |
| template<class T , class Predicate > | |
| T | getCheckOrDefault (const word &keyword, const T &deflt, const Predicate &pred, enum keyType::option matchOpt=keyType::REGEX) const |
| template<class T , class Predicate > | |
| T | getCheckOrAdd (const word &keyword, const T &deflt, const Predicate &pred, enum keyType::option matchOpt=keyType::REGEX) |
| template<class T , class Predicate > | |
| bool | readCheck (const word &keyword, T &val, const Predicate &pred, enum keyType::option matchOpt=keyType::REGEX, bool mandatory=true) const |
| template<class T , class Predicate > | |
| bool | readCheckIfPresent (const word &keyword, T &val, const Predicate &pred, enum keyType::option matchOpt=keyType::REGEX) const |
| bool | isDict (const word &keyword, enum keyType::option matchOpt=keyType::REGEX) const |
| Check if entry is found and is a sub-dictionary. More... | |
| const dictionary & | subDict (const word &keyword, enum keyType::option matchOpt=keyType::REGEX) const |
| Find and return a sub-dictionary. More... | |
| dictionary & | subDict (const word &keyword, enum keyType::option matchOpt=keyType::REGEX) |
| Find and return a sub-dictionary for manipulation. More... | |
| dictionary & | subDictOrAdd (const word &keyword, enum keyType::option matchOpt=keyType::REGEX) |
| Find and return a sub-dictionary for manipulation. More... | |
| dictionary | subOrEmptyDict (const word &keyword, enum keyType::option matchOpt=keyType::REGEX, const bool mandatory=false) const |
| const dictionary & | optionalSubDict (const word &keyword, enum keyType::option matchOpt=keyType::REGEX) const |
| Find and return a sub-dictionary, otherwise return this dictionary. More... | |
| wordList | toc () const |
| Return the table of contents. More... | |
| wordList | sortedToc () const |
| Return the sorted table of contents. More... | |
| template<class Compare > | |
| wordList | sortedToc (const Compare &comp) const |
| Return table of contents sorted using the specified comparator. More... | |
| List< keyType > | keys (bool patterns=false) const |
| Return the list of available keys or patterns. More... | |
| bool | substituteKeyword (const word &keyword, bool mergeEntry=false) |
| Substitute the given keyword (which is prefixed by '$') More... | |
| bool | substituteScopedKeyword (const word &keyword, bool mergeEntry=false) |
| Substitute the given scoped keyword (which is prefixed by '$') More... | |
| entry * | add (entry *entryPtr, bool mergeEntry=false) |
| Add a new entry. More... | |
| entry * | add (const entry &e, bool mergeEntry=false) |
| Add an entry. More... | |
| entry * | add (const keyType &k, const word &v, bool overwrite=false) |
| Add a word entry. More... | |
| entry * | add (const keyType &k, const string &v, bool overwrite=false) |
| Add a string entry. More... | |
| entry * | add (const keyType &k, const label v, bool overwrite=false) |
| Add a label entry. More... | |
| entry * | add (const keyType &k, const scalar v, bool overwrite=false) |
| Add a scalar entry. More... | |
| entry * | add (const keyType &k, const dictionary &d, bool mergeEntry=false) |
| Add a dictionary entry. More... | |
| template<class T > | |
| entry * | add (const keyType &k, const T &v, bool overwrite=false) |
| Add a T entry. More... | |
| entry * | set (entry *entryPtr) |
| Assign a new entry, overwriting any existing entry. More... | |
| entry * | set (const entry &e) |
| Assign a new entry, overwriting any existing entry. More... | |
| entry * | set (const keyType &k, const dictionary &v) |
| Assign a dictionary entry, overwriting any existing entry. More... | |
| template<class T > | |
| entry * | set (const keyType &k, const T &v) |
| Assign a T entry, overwriting any existing entry. More... | |
| bool | remove (const word &keyword) |
| Remove an entry specified by keyword. More... | |
| bool | changeKeyword (const keyType &oldKeyword, const keyType &newKeyword, bool overwrite=false) |
| Change the keyword for an entry,. More... | |
| bool | merge (const dictionary &dict) |
| Merge entries from the given dictionary. More... | |
| void | clear () |
| Clear the dictionary. More... | |
| void | transfer (dictionary &dict) |
| Transfer the contents of the argument and annul the argument. More... | |
| void | checkITstream (const ITstream &is, const word &keyword) const |
| bool | read (Istream &is) |
| Read dictionary from Istream. More... | |
| bool | read (Istream &is, bool keepHeader) |
| Read dictionary from Istream, optionally keeping the header. More... | |
| void | writeEntry (Ostream &os) const |
| Write sub-dictionary with its dictName as its header. More... | |
| void | writeEntry (const keyType &keyword, Ostream &os) const |
| Write sub-dictionary with the keyword as its header. More... | |
| void | writeEntries (Ostream &os, const bool extraNewLine=false) const |
| Write dictionary entries. More... | |
| void | write (Ostream &os, const bool subDict=true) const |
| Write dictionary, normally with sub-dictionary formatting. More... | |
| const_searcher | csearch (const word &keyword, enum keyType::option=keyType::REGEX) const |
| Search dictionary for given keyword. More... | |
| const_searcher | search (const word &keyword, enum keyType::option=keyType::REGEX) const |
| Search dictionary for given keyword. More... | |
| searcher | search (const word &keyword, enum keyType::option=keyType::REGEX) |
| Search dictionary for given keyword. More... | |
| const_searcher | csearchScoped (const word &keyword, enum keyType::option) const |
| Search using scoping. More... | |
| const_searcher | searchScoped (const word &keyword, enum keyType::option) const |
| Search using dot or slash scoping. More... | |
| searcher | searchScoped (const word &keyword, enum keyType::option) |
| Search using dot or slash scoping. More... | |
| const dictionary * | cfindScopedDict (const fileName &dictPath) const |
| Locate a sub-dictionary using slash-scoping. More... | |
| const dictionary * | findScopedDict (const fileName &dictPath) const |
| Locate a sub-dictionary using slash-scoping. More... | |
| dictionary * | findScopedDict (const fileName &dictPath) |
| Locate a sub-dictionary using slash-scoping. More... | |
| dictionary * | makeScopedDict (const fileName &dictPath) |
| Locate existing or create sub-dictionary using slash-scoping. More... | |
| const_searcher | csearchCompat (const word &keyword, std::initializer_list< std::pair< const char *, int >> compat, enum keyType::option=keyType::REGEX) const |
| Search dictionary for given keyword and any compatibility names. More... | |
| bool | foundCompat (const word &keyword, std::initializer_list< std::pair< const char *, int >> compat, enum keyType::option=keyType::REGEX) const |
| Search dictionary for given keyword and any compatibility names. More... | |
| const entry * | findCompat (const word &keyword, std::initializer_list< std::pair< const char *, int >> compat, enum keyType::option) const |
| const entry & | lookupEntryCompat (const word &keyword, std::initializer_list< std::pair< const char *, int >> compat, enum keyType::option) const |
| ITstream & | lookupCompat (const word &keyword, std::initializer_list< std::pair< const char *, int >> compat, enum keyType::option=keyType::REGEX) const |
| template<class T > | |
| T | getCompat (const word &keyword, std::initializer_list< std::pair< const char *, int >> compat, enum keyType::option=keyType::REGEX) const |
| template<class T > | |
| T | getOrDefaultCompat (const word &keyword, std::initializer_list< std::pair< const char *, int >> compat, const T &deflt, enum keyType::option=keyType::REGEX) const |
| template<class T > | |
| bool | readCompat (const word &keyword, std::initializer_list< std::pair< const char *, int >> compat, T &val, enum keyType::option=keyType::REGEX, bool mandatory=true) const |
| template<class T > | |
| bool | readIfPresentCompat (const word &keyword, std::initializer_list< std::pair< const char *, int >> compat, T &val, enum keyType::option=keyType::REGEX) const |
| void | operator= (const dictionary &rhs) |
| Copy assignment. More... | |
| void | operator+= (const dictionary &rhs) |
| Include entries from the given dictionary. More... | |
| void | operator|= (const dictionary &rhs) |
| Conditionally include entries from the given dictionary. More... | |
| void | operator<<= (const dictionary &rhs) |
| Unconditionally include entries from the given dictionary. More... | |
| template<class T > | |
| T | lookupOrDefault (const word &keyword, const T &deflt, enum keyType::option matchOpt=keyType::REGEX) const |
| template<class T > | |
| T | lookupOrAddDefault (const word &keyword, const T &deflt, enum keyType::option matchOpt=keyType::REGEX) |
| template<class T > | |
| T | lookupOrDefaultCompat (const word &keyword, std::initializer_list< std::pair< const char *, int >> compat, const T &deflt, enum keyType::option matchOpt=keyType::REGEX) const |
| ITstream & | operator[] (const word &keyword) const |
| Deprecated(2018-07) find and return an entry data stream. More... | |
| template<class T > | |
| T | lookupType (const word &keyword, bool recursive=false, bool patternMatch=true) const |
| Deprecated(2018-10) find and return a T. More... | |
| bool | found (const word &keyword, bool recursive, bool patternMatch=true) const |
| Deprecated(2018-10) More... | |
| entry * | lookupEntryPtr (const word &keyword, bool recursive, bool patternMatch) |
| Deprecated(2018-10) More... | |
| const entry * | lookupEntryPtr (const word &keyword, bool recursive, bool patternMatch) const |
| Deprecated(2018-10) More... | |
| const entry * | lookupScopedEntryPtr (const word &keyword, bool recursive, bool patternMatch) const |
| Deprecated(2018-10) More... | |
| const dictionary * | subDictPtr (const word &keyword) const |
| Deprecated(2018-10) More... | |
| dictionary * | subDictPtr (const word &keyword) |
| const entry & | lookupEntry (const word &keyword, bool recursive, bool patternMatch) const |
| Deprecated(2018-10) More... | |
| ITstream & | lookup (const word &keyword, bool recursive, bool patternMatch=true) const |
| Deprecated(2018-10) More... | |
| template<class T > | |
| T | lookupOrDefault (const word &keyword, const T &deflt, bool recursive, bool patternMatch=true) const |
| Deprecated(2018-10) More... | |
| template<class T > | |
| T | lookupOrAddDefault (const word &keyword, const T &deflt, bool recursive, bool patternMatch=true) |
| Deprecated(2018-10) More... | |
| template<class T > | |
| bool | readIfPresent (const word &keyword, T &val, bool recursive, bool patternMatch=true) const |
| Deprecated(2018-10) More... | |
| bool | getBool (const word &keyword, enum keyType::option matchOpt=keyType::REGEX) const |
| Same as get< bool >(const word&, keyType::option) More... | |
| label | getLabel (const word &keyword, enum keyType::option matchOpt=keyType::REGEX) const |
| Same as get< label >(const word&, keyType::option) More... | |
| scalar | getScalar (const word &keyword, enum keyType::option matchOpt=keyType::REGEX) const |
| Same as get< scalar >(const word&, keyType::option) More... | |
| string | getString (const word &keyword, enum keyType::option matchOpt=keyType::REGEX) const |
| Same as get< string >(const word&, keyType::option) More... | |
| word | getWord (const word &keyword, enum keyType::option matchOpt=keyType::REGEX) const |
| Same as get< word >(const word&, keyType::option) More... | |
| fileName | getFileName (const word &keyword, enum keyType::option matchOpt=keyType::REGEX) const |
| Same as get< fileName >(const word&, keyType::option) More... | |
| template<class Compare > | |
| Foam::wordList | sortedToc (const Compare &comp) const |
| template<class T > | |
| Foam::entry * | add (const keyType &k, const T &v, bool overwrite) |
| template<class T > | |
| Foam::entry * | set (const keyType &k, const T &v) |
| Public Member Functions inherited from ILList< LListBase, T > | |
| ILList ()=default | |
| Null construct. More... | |
| ILList (T *item) | |
| Construct and insert the initial T item pointer. More... | |
| ILList (Istream &is) | |
| Construct from Istream. More... | |
| ILList (const ILList< LListBase, T > &lst) | |
| Copy construct using the 'clone()' method for each element. More... | |
| ILList (ILList< LListBase, T > &&lst) | |
| Move construct. More... | |
| template<class CloneArg > | |
| ILList (const ILList< LListBase, T > &lst, const CloneArg &cloneArg) | |
| Copy constructor with additional argument for clone 'clone()'. More... | |
| template<class INew > | |
| ILList (Istream &is, const INew &inew) | |
| Construct from Istream using given Istream constructor class. More... | |
| ~ILList () | |
| Destructor. More... | |
| bool | eraseHead () |
| Remove the head element specified from the list and delete it. More... | |
| bool | erase (T *item) |
| Remove the specified element from the list and delete it. More... | |
| void | clear () |
| Clear the contents of the list. More... | |
| void | transfer (ILList< LListBase, T > &lst) |
| void | operator= (const ILList< LListBase, T > &lst) |
| Copy assignment using the 'clone()' method for each element. More... | |
| void | operator= (ILList< LListBase, T > &&lst) |
| Move assignment. More... | |
Protected Member Functions | |
| virtual bool | read () |
| Read control parameters from dictionary. More... | |
| virtual void | correctThermoFields () |
| Correct the thermo fields. More... | |
| virtual void | resetPrimaryRegionSourceTerms () |
| Reset source term fields. More... | |
| virtual void | transferPrimaryRegionThermoFields () |
| Transfer thermo fields from the primary region to the film region. More... | |
| virtual void | transferPrimaryRegionSourceFields () |
| Transfer source fields from the primary region to the film region. More... | |
| virtual tmp< volScalarField > | pu () |
| Explicit pressure source contribution. More... | |
| virtual tmp< volScalarField > | pp () |
| Implicit pressure source coefficient. More... | |
| virtual void | correctAlpha () |
| Correct film coverage field. More... | |
| virtual void | updateSubmodels () |
| Update the film sub-models. More... | |
| virtual void | continuityCheck () |
| Continuity check. More... | |
| virtual void | updateSurfaceVelocities () |
| Update film surface velocities. More... | |
| template<class Type > | |
| void | constrainFilmField (Type &field, const typename Type::cmptType &value) |
| Constrain a film region master/slave boundaries of a field to a. More... | |
| virtual void | solveContinuity () |
| Solve continuity equation. More... | |
| virtual tmp< fvVectorMatrix > | solveMomentum (const volScalarField &pu, const volScalarField &pp) |
| Solve for film velocity. More... | |
| virtual void | solveThickness (const volScalarField &pu, const volScalarField &pp, const fvVectorMatrix &UEqn) |
| Solve coupled velocity-thickness equations. More... | |
| Protected Member Functions inherited from regionModel | |
| virtual bool | read (const dictionary &dict) |
| Read control parameters from dictionary. More... | |
| virtual const AMIPatchToPatchInterpolation & | interRegionAMI (const regionModel &nbrRegion, const label regionPatchi, const label nbrPatchi, const bool flip) const |
| Create or return a new inter-region AMI object. More... | |
| Protected Member Functions inherited from regIOobject | |
| bool | readHeaderOk (const IOstream::streamFormat PstreamFormat, const word &typeName) |
| Helper: check readOpt flags and read if necessary. More... | |
| Istream * | objectStream () |
| Construct and return an IFstream for the object. More... | |
| Protected Member Functions inherited from IOobject | |
| void | setBad (const string &s) |
| Set the object state to bad. More... | |
Protected Attributes | |
| Switch | momentumPredictor_ |
| Momentum predictor. More... | |
| label | nOuterCorr_ |
| Number of outer correctors. More... | |
| label | nCorr_ |
| Number of PISO-like correctors. More... | |
| label | nNonOrthCorr_ |
| Number of non-orthogonal correctors. More... | |
| scalar | cumulativeContErr_ |
| Cumulative continuity error. More... | |
| const dimensionedScalar | deltaSmall_ |
| Small delta. More... | |
| scalar | deltaCoLimit_ |
| Film thickness above which Courant number calculation in valid. More... | |
| volScalarField | rho_ |
| Density [kg/m3]. More... | |
| volScalarField | mu_ |
| Dynamic viscosity [Pa.s]. More... | |
| volScalarField | sigma_ |
| Surface tension [m/s2]. More... | |
| volScalarField | delta_ |
| Film thickness [m]. More... | |
| volScalarField | alpha_ |
| Film coverage indicator, 1 = covered, 0 = uncovered []. More... | |
| volVectorField | U_ |
| Velocity - mean [m/s]. More... | |
| volVectorField | Us_ |
| Velocity - surface [m/s]. More... | |
| volVectorField | Uw_ |
| Velocity - wall [m/s]. More... | |
| volScalarField | deltaRho_ |
| Film thickness*density (helper field) [kg/m2]. More... | |
| surfaceScalarField | phi_ |
| Mass flux (includes film thickness) [kg.m/s]. More... | |
| volScalarField | primaryMassTrans_ |
| Film mass available for transfer to the primary region. More... | |
| volScalarField | cloudMassTrans_ |
| Film mass available for transfer to cloud. More... | |
| volScalarField | cloudDiameterTrans_ |
| Parcel diameters originating from film to cloud. More... | |
| volVectorField | USp_ |
| Momentum [kg/m/s2]. More... | |
| volScalarField | pSp_ |
| Pressure [Pa]. More... | |
| volScalarField | rhoSp_ |
| Mass [kg/m2/s]. More... | |
| volVectorField | USpPrimary_ |
| Momentum [kg/m/s2]. More... | |
| volScalarField | pSpPrimary_ |
| Pressure [Pa]. More... | |
| volScalarField | rhoSpPrimary_ |
| Mass [kg/m2/s]. More... | |
| volVectorField | UPrimary_ |
| Velocity [m/s]. More... | |
| volScalarField | pPrimary_ |
| Pressure [Pa]. More... | |
| volScalarField | rhoPrimary_ |
| Density [kg/m3]. More... | |
| volScalarField | muPrimary_ |
| Viscosity [Pa.s]. More... | |
| autoPtr< filmThermoModel > | filmThermo_ |
| Film thermo model. More... | |
| scalarField | availableMass_ |
| Available mass for transfer via sub-models. More... | |
| injectionModelList | injection_ |
| Cloud injection. More... | |
| transferModelList | transfer_ |
| Transfer with the continuous phase. More... | |
| autoPtr< filmTurbulenceModel > | turbulence_ |
| Turbulence model. More... | |
| forceList | forces_ |
| List of film forces. More... | |
| scalar | addedMassTotal_ |
| Cumulative mass added via sources [kg]. More... | |
| Protected Attributes inherited from surfaceFilmRegionModel | |
| const dimensionedVector & | g_ |
| Acceleration due to gravity [m/s2]. More... | |
| Protected Attributes inherited from singleLayerRegion | |
| autoPtr< volVectorField > | nHatPtr_ |
| Patch normal vectors. More... | |
| autoPtr< volScalarField > | magSfPtr_ |
| Face area magnitudes / [m2]. More... | |
| labelList | passivePatchIDs_ |
| List of patch IDs opposite to internally coupled patches. More... | |
| Protected Attributes inherited from regionModel | |
| const fvMesh & | primaryMesh_ |
| Reference to the primary mesh database. More... | |
| const Time & | time_ |
| Reference to the time database. More... | |
| Switch | active_ |
| Active flag. More... | |
| Switch | infoOutput_ |
| Active information output. More... | |
| const word | modelName_ |
| Model name. More... | |
| dictionary | coeffs_ |
| Model coefficients dictionary. More... | |
| autoPtr< IOdictionary > | outputPropertiesPtr_ |
| Dictionary of output properties. More... | |
| labelList | primaryPatchIDs_ |
| List of patch IDs on the primary region coupled to this region. More... | |
| labelList | intCoupledPatchIDs_ |
| List of patch IDs internally coupled with the primary region. More... | |
| word | regionName_ |
| Region name. More... | |
| regionModelFunctionObjectList | functions_ |
| Region model function objects. More... | |
| wordList | interRegionAMINames_ |
| List of region names this region is coupled to. More... | |
| PtrList< PtrList< AMIPatchToPatchInterpolation > > | interRegionAMI_ |
| List of AMI objects per coupled region. More... | |
Additional Inherited Members | |
| Public Types inherited from IOobject | |
| enum | objectState : char { GOOD, BAD } |
| Enumeration defining the valid states of an IOobject. More... | |
| enum | readOption : char { MUST_READ, MUST_READ_IF_MODIFIED, READ_IF_PRESENT, NO_READ } |
| Enumeration defining the read options. More... | |
| enum | writeOption : char { AUTO_WRITE = 0, NO_WRITE = 1 } |
| Enumeration defining the write options. More... | |
| enum | fileCheckTypes : char { timeStamp, timeStampMaster, inotify, inotifyMaster } |
| Enumeration defining the file checking options. More... | |
| Public Types inherited from dictionary | |
| typedef Searcher< true > | const_searcher |
| Searcher with const access. More... | |
| typedef Searcher< false > | searcher |
| Searcher with non-const access. More... | |
| Static Public Member Functions inherited from surfaceFilmModel | |
| static autoPtr< surfaceFilmModel > | New (const fvMesh &mesh, const dimensionedVector &g, const word ®ionType="surfaceFilm") |
| Return a reference to the selected surface film model. More... | |
| Static Public Member Functions inherited from regIOobject | |
| template<class Type > | |
| static Type & | store (Type *p) |
| template<class Type > | |
| static Type & | store (autoPtr< Type > &aptr) |
| template<class Type > | |
| static Type & | store (autoPtr< Type > &&aptr) |
| template<class Type > | |
| static Type & | store (tmp< Type > &tptr) |
| template<class Type > | |
| static Type & | store (tmp< Type > &&tptr) |
| Static Public Member Functions inherited from IOobject | |
| static bool | fileNameComponents (const fileName &path, fileName &instance, fileName &local, word &name) |
| Split path into instance, local, name components. More... | |
| template<class StringType > | |
| static word | groupName (StringType base, const word &group) |
| Create dot-delimited name.group string. More... | |
| static word | group (const word &name) |
| Return group (extension part of name) More... | |
| static word | member (const word &name) |
| Return member (name without the extension) More... | |
| template<class StringType > | |
| static word | scopedName (StringType scope, const word &name) |
| Create scope:name or scope_name string. More... | |
| static IOobject | selectIO (const IOobject &io, const fileName &altFile, const word &ioName="") |
| Return the IOobject, but also consider an alternative file name. More... | |
| static Ostream & | writeBanner (Ostream &os, bool noHint=false) |
| Write the standard OpenFOAM file/dictionary banner. More... | |
| static Ostream & | writeDivider (Ostream &os) |
| Write the standard file section divider. More... | |
| static Ostream & | writeEndDivider (Ostream &os) |
| Write the standard end file divider. More... | |
| Static Public Member Functions inherited from dictionary | |
| static autoPtr< dictionary > | New (Istream &is) |
| Construct top-level dictionary on freestore from Istream. More... | |
| Public Attributes inherited from dictionary | |
| friend | const_searcher |
| Declare friendship with the searcher classes. More... | |
| friend | searcher |
| Static Public Attributes inherited from surfaceFilmModel | |
| static const dimensionedScalar | Tref |
| Reference temperature for enthalpy. More... | |
| Static Public Attributes inherited from regIOobject | |
| static float | fileModificationSkew |
| static int | maxFileModificationPolls |
| Static Public Attributes inherited from IOobject | |
| static const Enum< fileCheckTypes > | fileCheckTypesNames |
| Names for the fileCheckTypes. More... | |
| static char | scopeSeparator |
| Character for scoping object names (':' or '_') More... | |
| static fileCheckTypes | fileModificationChecking |
| Type of file modification checking. More... | |
| Static Public Attributes inherited from dictionary | |
| static int | writeOptionalEntries |
| Report optional keywords and values if not present in dictionary. More... | |
| static const dictionary | null |
| An empty dictionary, which is also the parent for all dictionaries. More... | |
| Static Protected Attributes inherited from regIOobject | |
| static bool | masterOnlyReading = false |
| To flag master-only reading of objects. More... | |
Kinematic form of single-cell layer surface film model.
Definition at line 67 of file kinematicSingleLayer.H.
| kinematicSingleLayer | ( | const word & | modelType, |
| const fvMesh & | mesh, | ||
| const dimensionedVector & | g, | ||
| const word & | regionType, | ||
| const bool | readFields = true |
||
| ) |
Construct from components.
Definition at line 436 of file kinematicSingleLayer.C.
References IOobject::AUTO_WRITE, Foam::fvc::flux(), Foam::constant::electromagnetic::phi0, IOobject::READ_IF_PRESENT, Foam::readFields(), and timeName.
|
virtual |
Destructor.
Definition at line 823 of file kinematicSingleLayer.C.
|
protectedvirtual |
Read control parameters from dictionary.
Reimplemented from surfaceFilmRegionModel.
Reimplemented in thermoSingleLayer.
Definition at line 59 of file kinematicSingleLayer.C.
References kinematicSingleLayer::momentumPredictor_, kinematicSingleLayer::nCorr_, kinematicSingleLayer::nNonOrthCorr_, kinematicSingleLayer::nOuterCorr_, surfaceFilmRegionModel::read(), dictionary::readEntry(), dictionary::readIfPresent(), regionModel::solution(), and dictionary::subDict().
Referenced by thermoSingleLayer::read().
|
protectedvirtual |
Correct the thermo fields.
Reimplemented in thermoSingleLayer.
Definition at line 76 of file kinematicSingleLayer.C.
References kinematicSingleLayer::filmThermo_, kinematicSingleLayer::mu_, kinematicSingleLayer::rho_, and kinematicSingleLayer::sigma_.
Referenced by kinematicSingleLayer::preEvolveRegion().
|
protectedvirtual |
Reset source term fields.
Reimplemented in thermoSingleLayer.
Definition at line 84 of file kinematicSingleLayer.C.
References DebugInFunction, Foam::endl(), kinematicSingleLayer::pSp_, kinematicSingleLayer::pSpPrimary_, kinematicSingleLayer::rhoSp_, kinematicSingleLayer::rhoSpPrimary_, kinematicSingleLayer::USp_, kinematicSingleLayer::USpPrimary_, and Foam::Zero.
Referenced by kinematicSingleLayer::postEvolveRegion(), and thermoSingleLayer::resetPrimaryRegionSourceTerms().
|
protectedvirtual |
Transfer thermo fields from the primary region to the film region.
Reimplemented in thermoSingleLayer.
Definition at line 94 of file kinematicSingleLayer.C.
References GeometricField< Type, PatchField, GeoMesh >::correctBoundaryConditions(), DebugInFunction, Foam::endl(), kinematicSingleLayer::muPrimary_, kinematicSingleLayer::pPrimary_, kinematicSingleLayer::rhoPrimary_, and kinematicSingleLayer::UPrimary_.
Referenced by kinematicSingleLayer::preEvolveRegion(), and thermoSingleLayer::transferPrimaryRegionThermoFields().
|
protectedvirtual |
Transfer source fields from the primary region to the film region.
Reimplemented in thermoSingleLayer.
Definition at line 107 of file kinematicSingleLayer.C.
References dictionary::add(), kinematicSingleLayer::addedMassTotal_, GeometricField< Type, PatchField, GeoMesh >::boundaryField(), GeometricField< Type, PatchField, GeoMesh >::boundaryFieldRef(), GeometricField< Type, PatchField, GeoMesh >::correctBoundaryConditions(), Foam::expressions::patchExpr::debug, DebugInFunction, TimeState::deltaTValue(), Foam::endl(), forAll, singleLayerRegion::magSf(), regionModel::outputProperties(), regionModel::primaryMesh(), kinematicSingleLayer::pSp_, kinematicSingleLayer::pSpPrimary_, dictionary::readIfPresent(), Foam::returnReduce(), kinematicSingleLayer::rhoSp_, kinematicSingleLayer::rhoSpPrimary_, regionModel::time(), regionModel::time_, kinematicSingleLayer::USp_, and kinematicSingleLayer::USpPrimary_.
Referenced by kinematicSingleLayer::preEvolveRegion(), and thermoSingleLayer::transferPrimaryRegionSourceFields().
|
protectedvirtual |
Explicit pressure source contribution.
Definition at line 162 of file kinematicSingleLayer.C.
References kinematicSingleLayer::delta_, Foam::fvc::laplacian(), IOobject::NO_READ, IOobject::NO_WRITE, kinematicSingleLayer::pPrimary_, kinematicSingleLayer::pSp_, regionModel::regionMesh(), kinematicSingleLayer::sigma_, regionModel::time_, and Time::timeName().
Referenced by thermoSingleLayer::evolveRegion(), and kinematicSingleLayer::evolveRegion().
|
protectedvirtual |
Implicit pressure source coefficient.
Definition at line 184 of file kinematicSingleLayer.C.
References kinematicSingleLayer::gNormClipped(), IOobject::NO_READ, IOobject::NO_WRITE, regionModel::regionMesh(), kinematicSingleLayer::rho_, regionModel::time_, and Time::timeName().
Referenced by thermoSingleLayer::evolveRegion(), kinematicSingleLayer::evolveRegion(), thermoSingleLayer::updateSurfaceTemperatures(), and kinematicSingleLayer::updateSurfaceVelocities().
|
protectedvirtual |
Correct film coverage field.
Reimplemented in thermoSingleLayer.
Definition at line 204 of file kinematicSingleLayer.C.
References kinematicSingleLayer::alpha_, kinematicSingleLayer::delta_, kinematicSingleLayer::deltaSmall_, and Foam::pos().
Referenced by kinematicSingleLayer::preEvolveRegion().
|
protectedvirtual |
Update the film sub-models.
Reimplemented in thermoSingleLayer.
Definition at line 210 of file kinematicSingleLayer.C.
References kinematicSingleLayer::availableMass_, kinematicSingleLayer::cloudDiameterTrans_, kinematicSingleLayer::cloudMassTrans_, transferModelList::correct(), injectionModelList::correct(), DebugInFunction, TimeState::deltaT(), Foam::endl(), kinematicSingleLayer::injection_, singleLayerRegion::magSf(), kinematicSingleLayer::rhoSp_, regionModel::time(), kinematicSingleLayer::transfer_, and kinematicSingleLayer::turbulence_.
Referenced by kinematicSingleLayer::evolveRegion().
|
protectedvirtual |
Continuity check.
Definition at line 227 of file kinematicSingleLayer.C.
References kinematicSingleLayer::cumulativeContErr_, Foam::expressions::patchExpr::debug, kinematicSingleLayer::deltaRho_, Foam::dimMass, Foam::dimVolume, Foam::fvc::domainIntegrate(), Foam::endl(), globalContErr, InfoInFunction, Foam::mag(), singleLayerRegion::magSf(), kinematicSingleLayer::mass(), Foam::nl, kinematicSingleLayer::solveContinuity(), sumLocalContErr, totalMass, and Foam::type().
|
protectedvirtual |
Update film surface velocities.
Definition at line 275 of file kinematicSingleLayer.C.
References GeometricField< Type, PatchField, GeoMesh >::boundaryField(), polyMesh::boundaryMesh(), GeometricField< Type, PatchField, GeoMesh >::correctBoundaryConditions(), regionModel::intCoupledPatchIDs_, singleLayerRegion::nHat(), kinematicSingleLayer::pp(), regionModel::regionMesh(), kinematicSingleLayer::turbulence_, kinematicSingleLayer::U_, kinematicSingleLayer::Us_, and kinematicSingleLayer::Uw_.
Referenced by kinematicSingleLayer::preEvolveRegion().
|
protected |
Constrain a film region master/slave boundaries of a field to a.
given value
Definition at line 43 of file kinematicSingleLayerTemplates.C.
References Foam::expressions::patchExpr::debug, Foam::endl(), field(), forAll, and Foam::Info.
|
protectedvirtual |
Solve continuity equation.
Definition at line 261 of file kinematicSingleLayer.C.
References Foam::fvm::ddt(), DebugInFunction, kinematicSingleLayer::deltaRho_, Foam::fvc::div(), Foam::endl(), kinematicSingleLayer::phi_, kinematicSingleLayer::rhoSp_, and Foam::solve().
Referenced by kinematicSingleLayer::continuityCheck(), thermoSingleLayer::evolveRegion(), and kinematicSingleLayer::evolveRegion().
|
protectedvirtual |
Solve for film velocity.
Definition at line 293 of file kinematicSingleLayer.C.
References Foam::fvm::ddt(), DebugInFunction, Foam::fvm::div(), Foam::endl(), Foam::fvc::flux(), Foam::fvc::interpolate(), Foam::fvc::reconstruct(), Foam::fvc::snGrad(), Foam::solve(), tUEqn(), and UEqn.
Referenced by thermoSingleLayer::evolveRegion(), and kinematicSingleLayer::evolveRegion().
|
protectedvirtual |
Solve coupled velocity-thickness equations.
Definition at line 348 of file kinematicSingleLayer.C.
References Foam::fvm::ddt(), DebugInFunction, Foam::fvm::div(), Foam::endl(), Foam::fvc::flux(), fvMatrix< Type >::flux(), Foam::fvc::interpolate(), Foam::fvm::laplacian(), phid(), Foam::fvc::reconstruct(), rhof(), Foam::fvc::snGrad(), fvMatrix< Type >::solve(), and UEqn.
Referenced by thermoSingleLayer::evolveRegion(), and kinematicSingleLayer::evolveRegion().
| TypeName | ( | "kinematicSingleLayer" | ) |
Runtime type information.
|
virtual |
Courant number evaluation.
Implements surfaceFilmModel.
Definition at line 920 of file kinematicSingleLayer.C.
References kinematicSingleLayer::alpha_, CoNum, kinematicSingleLayer::delta_, kinematicSingleLayer::deltaCoLimit_, kinematicSingleLayer::deltaRho_, TimeState::deltaTValue(), Foam::endl(), forAll, Foam::Info, Foam::mag(), singleLayerRegion::magSf(), Foam::max(), kinematicSingleLayer::phi_, GeometricField< Type, PatchField, GeoMesh >::primitiveField(), Foam::reduce(), regionModel::regionMesh(), Foam::fvc::surfaceSum(), and regionModel::time_.
|
inline |
Return the momentum predictor.
Definition at line 44 of file kinematicSingleLayerI.H.
References kinematicSingleLayer::momentumPredictor_.
|
inline |
Return the number of outer correctors.
Definition at line 50 of file kinematicSingleLayerI.H.
References kinematicSingleLayer::nOuterCorr_.
|
inline |
Return the number of PISO correctors.
Definition at line 56 of file kinematicSingleLayerI.H.
References kinematicSingleLayer::nCorr_.
|
inline |
Return the number of non-orthogonal correctors.
Definition at line 62 of file kinematicSingleLayerI.H.
References kinematicSingleLayer::nNonOrthCorr_.
|
inline |
Return small delta.
Definition at line 68 of file kinematicSingleLayerI.H.
References kinematicSingleLayer::deltaSmall_.
Referenced by thixotropicViscosity::correct().
|
inline |
Return const access to the dynamic viscosity [Pa.s].
Definition at line 74 of file kinematicSingleLayerI.H.
References kinematicSingleLayer::mu_.
|
inlinevirtual |
Return const access to the surface tension [kg/s2].
Implements surfaceFilmRegionModel.
Definition at line 80 of file kinematicSingleLayerI.H.
References kinematicSingleLayer::sigma_.
Referenced by BrunDrippingInjection::correct(), and curvatureSeparation::correct().
|
inlinevirtual |
Return const access to the film thickness [m].
Implements surfaceFilmRegionModel.
Definition at line 86 of file kinematicSingleLayerI.H.
References kinematicSingleLayer::delta_.
Referenced by drippingInjection::correct(), BrunDrippingInjection::correct(), curvatureSeparation::correct(), thixotropicViscosity::correct(), standardPhaseChange::correctModel(), and waxSolventEvaporation::correctModel().
|
inlinevirtual |
Return the film coverage, 1 = covered, 0 = uncovered [].
Implements surfaceFilmRegionModel.
Definition at line 92 of file kinematicSingleLayerI.H.
References kinematicSingleLayer::alpha_.
Referenced by thixotropicViscosity::correct(), and solidification::correctModel().
|
virtual |
Return the film velocity [m/s].
Implements surfaceFilmRegionModel.
Definition at line 951 of file kinematicSingleLayer.C.
References kinematicSingleLayer::U_.
Referenced by curvatureSeparation::correct(), and thixotropicViscosity::correct().
|
virtual |
Return the film surface velocity [m/s].
Implements surfaceFilmRegionModel.
Definition at line 957 of file kinematicSingleLayer.C.
References kinematicSingleLayer::Us_.
Referenced by standardPhaseChange::correctModel(), and waxSolventEvaporation::correctModel().
|
virtual |
Return the film wall velocity [m/s].
Implements surfaceFilmRegionModel.
Definition at line 963 of file kinematicSingleLayer.C.
References kinematicSingleLayer::Uw_.
Referenced by thixotropicViscosity::correct().
|
virtual |
Return the film thickness*density (helper field) [kg/m3].
Definition at line 969 of file kinematicSingleLayer.C.
References kinematicSingleLayer::deltaRho_.
Referenced by thixotropicViscosity::correct(), and waxSolventEvaporation::correctModel().
|
virtual |
Return the film flux [kg.m/s].
Definition at line 975 of file kinematicSingleLayer.C.
References kinematicSingleLayer::phi_.
Referenced by curvatureSeparation::correct(), thixotropicViscosity::correct(), and waxSolventEvaporation::correctModel().
|
virtual |
Return the film density [kg/m3].
Implements surfaceFilmRegionModel.
Definition at line 981 of file kinematicSingleLayer.C.
References kinematicSingleLayer::rho_.
Referenced by drippingInjection::correct(), BrunDrippingInjection::correct(), curvatureSeparation::correct(), standardPhaseChange::correctModel(), waxSolventEvaporation::correctModel(), and solidification::correctModel().
|
virtual |
Return the film mean temperature [K].
Implements surfaceFilmRegionModel.
Reimplemented in thermoSingleLayer.
Definition at line 987 of file kinematicSingleLayer.C.
References Foam::abort(), Foam::FatalError, FatalErrorInFunction, GeometricField< scalar, fvPatchField, volMesh >::null(), and Foam::type().
|
virtual |
Return the film surface temperature [K].
Implements surfaceFilmRegionModel.
Reimplemented in thermoSingleLayer.
Definition at line 996 of file kinematicSingleLayer.C.
References Foam::abort(), Foam::FatalError, FatalErrorInFunction, GeometricField< scalar, fvPatchField, volMesh >::null(), and Foam::type().
|
virtual |
Return the film wall temperature [K].
Implements surfaceFilmRegionModel.
Reimplemented in thermoSingleLayer.
Definition at line 1005 of file kinematicSingleLayer.C.
References Foam::abort(), Foam::FatalError, FatalErrorInFunction, GeometricField< scalar, fvPatchField, volMesh >::null(), and Foam::type().
|
virtual |
Return the film surface enthalpy [J/kg].
Implements surfaceFilmRegionModel.
Reimplemented in thermoSingleLayer.
Definition at line 1014 of file kinematicSingleLayer.C.
References Foam::abort(), Foam::FatalError, FatalErrorInFunction, GeometricField< scalar, fvPatchField, volMesh >::null(), and Foam::type().
|
virtual |
Return the film specific heat capacity [J/kg/K].
Implements surfaceFilmRegionModel.
Reimplemented in thermoSingleLayer.
Definition at line 1023 of file kinematicSingleLayer.C.
References Foam::abort(), Foam::FatalError, FatalErrorInFunction, GeometricField< scalar, fvPatchField, volMesh >::null(), and Foam::type().
|
virtual |
Return the film thermal conductivity [W/m/K].
Implements surfaceFilmRegionModel.
Reimplemented in thermoSingleLayer.
Definition at line 1032 of file kinematicSingleLayer.C.
References Foam::abort(), Foam::FatalError, FatalErrorInFunction, GeometricField< scalar, fvPatchField, volMesh >::null(), and Foam::type().
|
virtual |
Return mass transfer source - Eulerian phase only.
Implements surfaceFilmRegionModel.
Definition at line 1041 of file kinematicSingleLayer.C.
References kinematicSingleLayer::primaryMassTrans_.
|
virtual |
Return the film mass available for transfer to cloud.
Implements surfaceFilmRegionModel.
Definition at line 1047 of file kinematicSingleLayer.C.
References kinematicSingleLayer::cloudMassTrans_.
|
virtual |
Return the parcel diameters originating from film to cloud.
Implements surfaceFilmRegionModel.
Definition at line 1053 of file kinematicSingleLayer.C.
References kinematicSingleLayer::cloudDiameterTrans_.
|
virtual |
External hook to add sources to the film.
Implements surfaceFilmRegionModel.
Reimplemented in thermoSingleLayer.
Definition at line 830 of file kinematicSingleLayer.C.
References DebugInFunction, Foam::endl(), Foam::nl, and Foam::type().
Referenced by thermoSingleLayer::addSources().
|
inline |
Momentum [kg/m/s2].
Definition at line 98 of file kinematicSingleLayerI.H.
References kinematicSingleLayer::USpPrimary_.
|
inline |
Pressure [Pa].
Definition at line 104 of file kinematicSingleLayerI.H.
References kinematicSingleLayer::pSpPrimary_.
|
inline |
Mass [kg/m2/s].
Definition at line 110 of file kinematicSingleLayerI.H.
References kinematicSingleLayer::rhoSpPrimary_.
|
inline |
Momentum [kg/m/s2].
Definition at line 116 of file kinematicSingleLayerI.H.
References kinematicSingleLayer::USp_.
|
inline |
Pressure [Pa].
Definition at line 122 of file kinematicSingleLayerI.H.
References kinematicSingleLayer::pSp_.
|
inline |
Mass [kg/m2/s].
Definition at line 128 of file kinematicSingleLayerI.H.
References kinematicSingleLayer::rhoSp_.
Referenced by thixotropicViscosity::correct(), and waxSolventEvaporation::correctModel().
|
inline |
Momentum [kg/m/s2].
Definition at line 134 of file kinematicSingleLayerI.H.
References kinematicSingleLayer::USp_.
|
inline |
Pressure [Pa].
Definition at line 140 of file kinematicSingleLayerI.H.
References kinematicSingleLayer::pSp_.
|
inline |
Mass [kg/m2/s].
Definition at line 146 of file kinematicSingleLayerI.H.
References kinematicSingleLayer::rhoSp_.
|
inline |
Velocity [m/s].
Definition at line 152 of file kinematicSingleLayerI.H.
References kinematicSingleLayer::UPrimary_.
Referenced by standardPhaseChange::correctModel(), and waxSolventEvaporation::correctModel().
|
inline |
Pressure [Pa].
Definition at line 158 of file kinematicSingleLayerI.H.
References kinematicSingleLayer::pPrimary_.
Referenced by standardPhaseChange::correctModel(), and waxSolventEvaporation::correctModel().
|
inline |
Density [kg/m3].
Definition at line 164 of file kinematicSingleLayerI.H.
References kinematicSingleLayer::rhoPrimary_.
Referenced by standardPhaseChange::correctModel(), and waxSolventEvaporation::correctModel().
|
inline |
Viscosity [Pa.s].
Definition at line 170 of file kinematicSingleLayerI.H.
References kinematicSingleLayer::muPrimary_.
Referenced by standardPhaseChange::correctModel(), and waxSolventEvaporation::correctModel().
|
inline |
Film thermo.
Definition at line 176 of file kinematicSingleLayerI.H.
References kinematicSingleLayer::filmThermo_.
Referenced by liquidViscosity::correct(), standardPhaseChange::correctModel(), and waxSolventEvaporation::correctModel().
|
inline |
Injection.
Definition at line 182 of file kinematicSingleLayerI.H.
References kinematicSingleLayer::injection_.
|
inline |
Transfer.
Definition at line 188 of file kinematicSingleLayerI.H.
References kinematicSingleLayer::transfer_.
|
inline |
Turbulence.
Definition at line 194 of file kinematicSingleLayerI.H.
References kinematicSingleLayer::turbulence_.
|
inline |
Return the current film mass.
Definition at line 200 of file kinematicSingleLayerI.H.
References kinematicSingleLayer::deltaRho_, and singleLayerRegion::magSf().
Referenced by kinematicSingleLayer::continuityCheck(), and kinematicSingleLayer::preEvolveRegion().
|
inline |
Return the change in film mass due to sources/sinks.
Definition at line 206 of file kinematicSingleLayerI.H.
References TimeState::deltaT(), singleLayerRegion::magSf(), kinematicSingleLayer::rhoSp_, and regionModel::time().
|
inline |
Return the gravity normal-to-patch component contribution.
Definition at line 212 of file kinematicSingleLayerI.H.
References surfaceFilmRegionModel::g_, singleLayerRegion::nHat(), IOobject::NO_READ, IOobject::NO_WRITE, regionModel::regionMesh(), regionModel::time(), and timeName.
Referenced by drippingInjection::correct(), BrunDrippingInjection::correct(), and kinematicSingleLayer::gTan().
|
inline |
Return the gravity normal-to-patch component contribution.
Clipped so that only non-zero if g & nHat_ < 0
Definition at line 234 of file kinematicSingleLayerI.H.
References surfaceFilmRegionModel::g_, singleLayerRegion::nHat(), IOobject::NO_READ, IOobject::NO_WRITE, tmp< T >::ref(), regionModel::regionMesh(), regionModel::time(), and timeName.
Referenced by kinematicSingleLayer::pp().
|
inline |
Return the gravity tangential component contributions.
Definition at line 259 of file kinematicSingleLayerI.H.
References surfaceFilmRegionModel::g_, kinematicSingleLayer::gNorm(), singleLayerRegion::nHat(), IOobject::NO_READ, IOobject::NO_WRITE, regionModel::regionMesh(), regionModel::time(), and timeName.
|
inline |
Return the gravity tangential component contributions for patchI.
Definition at line 281 of file kinematicSingleLayerI.H.
References g.
|
virtual |
Pre-evolve film hook.
Reimplemented from regionModel.
Reimplemented in thermoSingleLayer.
Definition at line 853 of file kinematicSingleLayer.C.
References kinematicSingleLayer::availableMass_, kinematicSingleLayer::cloudDiameterTrans_, kinematicSingleLayer::cloudMassTrans_, kinematicSingleLayer::correctAlpha(), kinematicSingleLayer::correctThermoFields(), DebugInFunction, Foam::dimLength, Foam::dimMass, Foam::endl(), kinematicSingleLayer::mass(), regionModel::preEvolveRegion(), kinematicSingleLayer::primaryMassTrans_, kinematicSingleLayer::transferPrimaryRegionSourceFields(), kinematicSingleLayer::transferPrimaryRegionThermoFields(), kinematicSingleLayer::updateSurfaceVelocities(), and Foam::Zero.
Referenced by thermoSingleLayer::preEvolveRegion().
|
virtual |
Evolve the film equations.
Reimplemented from regionModel.
Reimplemented in thermoSingleLayer.
Definition at line 877 of file kinematicSingleLayer.C.
References DebugInFunction, kinematicSingleLayer::delta_, kinematicSingleLayer::deltaRho_, Foam::endl(), kinematicSingleLayer::nCorr_, kinematicSingleLayer::nOuterCorr_, kinematicSingleLayer::pp(), kinematicSingleLayer::pu(), kinematicSingleLayer::rho_, kinematicSingleLayer::solveContinuity(), kinematicSingleLayer::solveMomentum(), kinematicSingleLayer::solveThickness(), UEqn, and kinematicSingleLayer::updateSubmodels().
|
virtual |
Post-evolve film hook.
Reimplemented from regionModel.
Definition at line 911 of file kinematicSingleLayer.C.
References DebugInFunction, Foam::endl(), and kinematicSingleLayer::resetPrimaryRegionSourceTerms().
|
virtual |
Return total mass source - Eulerian phase only.
Implements surfaceFilmModel.
Reimplemented in thermoSingleLayer.
Definition at line 1084 of file kinematicSingleLayer.C.
References Foam::dimMass, Foam::dimTime, Foam::dimVolume, tmp< T >::New(), IOobject::NO_READ, IOobject::NO_WRITE, regionModel::primaryMesh(), regionModel::time(), timeName, and Foam::Zero.
|
virtual |
Return mass source for specie i - Eulerian phase only.
Implements surfaceFilmModel.
Reimplemented in thermoSingleLayer.
Definition at line 1104 of file kinematicSingleLayer.C.
References Foam::dimMass, Foam::dimTime, Foam::dimVolume, Foam::name(), tmp< T >::New(), IOobject::NO_READ, IOobject::NO_WRITE, timeName, and Foam::Zero.
|
virtual |
Return enthalpy source - Eulerian phase only.
Implements surfaceFilmModel.
Reimplemented in thermoSingleLayer.
Definition at line 1125 of file kinematicSingleLayer.C.
References Foam::dimEnergy, Foam::dimTime, Foam::dimVolume, tmp< T >::New(), IOobject::NO_READ, IOobject::NO_WRITE, regionModel::primaryMesh(), regionModel::time(), timeName, and Foam::Zero.
|
virtual |
Provide some feedback.
Reimplemented from regionModel.
Reimplemented in thermoSingleLayer.
Definition at line 1059 of file kinematicSingleLayer.C.
References kinematicSingleLayer::addedMassTotal_, kinematicSingleLayer::alpha_, kinematicSingleLayer::delta_, kinematicSingleLayer::deltaRho_, Foam::endl(), Foam::gMax(), Foam::gMin(), Foam::gSum(), Foam::indent(), injectionModelList::info(), transferModelList::info(), Foam::Info, kinematicSingleLayer::injection_, Foam::mag(), singleLayerRegion::magSf(), Foam::nl, regionModel::outputProperties(), GeometricField< Type, PatchField, GeoMesh >::primitiveField(), dictionary::readIfPresent(), Foam::returnReduce(), kinematicSingleLayer::transfer_, Foam::type(), and kinematicSingleLayer::U_.
Referenced by thermoSingleLayer::info().
|
protected |
Momentum predictor.
Definition at line 89 of file kinematicSingleLayer.H.
Referenced by kinematicSingleLayer::momentumPredictor(), and kinematicSingleLayer::read().
|
protected |
Number of outer correctors.
Definition at line 92 of file kinematicSingleLayer.H.
Referenced by thermoSingleLayer::evolveRegion(), kinematicSingleLayer::evolveRegion(), kinematicSingleLayer::nOuterCorr(), and kinematicSingleLayer::read().
|
protected |
Number of PISO-like correctors.
Definition at line 95 of file kinematicSingleLayer.H.
Referenced by thermoSingleLayer::evolveRegion(), kinematicSingleLayer::evolveRegion(), kinematicSingleLayer::nCorr(), and kinematicSingleLayer::read().
|
protected |
Number of non-orthogonal correctors.
Definition at line 98 of file kinematicSingleLayer.H.
Referenced by kinematicSingleLayer::nNonOrthCorr(), and kinematicSingleLayer::read().
|
protected |
Cumulative continuity error.
Definition at line 101 of file kinematicSingleLayer.H.
Referenced by kinematicSingleLayer::continuityCheck().
|
protected |
Small delta.
Definition at line 104 of file kinematicSingleLayer.H.
Referenced by kinematicSingleLayer::correctAlpha(), and kinematicSingleLayer::deltaSmall().
|
protected |
Film thickness above which Courant number calculation in valid.
Definition at line 107 of file kinematicSingleLayer.H.
Referenced by kinematicSingleLayer::CourantNumber().
|
protected |
Density [kg/m3].
Definition at line 115 of file kinematicSingleLayer.H.
Referenced by thermoSingleLayer::correctThermoFields(), kinematicSingleLayer::correctThermoFields(), thermoSingleLayer::evolveRegion(), kinematicSingleLayer::evolveRegion(), kinematicSingleLayer::pp(), and kinematicSingleLayer::rho().
|
protected |
Dynamic viscosity [Pa.s].
Definition at line 118 of file kinematicSingleLayer.H.
Referenced by kinematicSingleLayer::correctThermoFields(), and kinematicSingleLayer::mu().
|
protected |
Surface tension [m/s2].
Definition at line 121 of file kinematicSingleLayer.H.
Referenced by thermoSingleLayer::correctThermoFields(), kinematicSingleLayer::correctThermoFields(), kinematicSingleLayer::pu(), and kinematicSingleLayer::sigma().
|
protected |
Film thickness [m].
Definition at line 127 of file kinematicSingleLayer.H.
Referenced by thermoSingleLayer::correctAlpha(), kinematicSingleLayer::correctAlpha(), kinematicSingleLayer::CourantNumber(), kinematicSingleLayer::delta(), thermoSingleLayer::evolveRegion(), kinematicSingleLayer::evolveRegion(), kinematicSingleLayer::info(), and kinematicSingleLayer::pu().
|
protected |
Film coverage indicator, 1 = covered, 0 = uncovered [].
Definition at line 130 of file kinematicSingleLayer.H.
Referenced by kinematicSingleLayer::alpha(), thermoSingleLayer::correctAlpha(), kinematicSingleLayer::correctAlpha(), kinematicSingleLayer::CourantNumber(), kinematicSingleLayer::info(), and thermoSingleLayer::q().
|
protected |
Velocity - mean [m/s].
Definition at line 133 of file kinematicSingleLayer.H.
Referenced by kinematicSingleLayer::info(), kinematicSingleLayer::U(), and kinematicSingleLayer::updateSurfaceVelocities().
|
protected |
Velocity - surface [m/s].
Definition at line 136 of file kinematicSingleLayer.H.
Referenced by kinematicSingleLayer::updateSurfaceVelocities(), and kinematicSingleLayer::Us().
|
protected |
Velocity - wall [m/s].
Definition at line 139 of file kinematicSingleLayer.H.
Referenced by kinematicSingleLayer::updateSurfaceVelocities(), and kinematicSingleLayer::Uw().
|
protected |
Film thickness*density (helper field) [kg/m2].
Definition at line 142 of file kinematicSingleLayer.H.
Referenced by kinematicSingleLayer::continuityCheck(), kinematicSingleLayer::CourantNumber(), kinematicSingleLayer::deltaRho(), thermoSingleLayer::evolveRegion(), kinematicSingleLayer::evolveRegion(), kinematicSingleLayer::info(), kinematicSingleLayer::mass(), kinematicSingleLayer::solveContinuity(), and thermoSingleLayer::solveEnergy().
|
protected |
Mass flux (includes film thickness) [kg.m/s].
Definition at line 145 of file kinematicSingleLayer.H.
Referenced by kinematicSingleLayer::CourantNumber(), kinematicSingleLayer::phi(), kinematicSingleLayer::solveContinuity(), and thermoSingleLayer::solveEnergy().
|
protected |
Film mass available for transfer to the primary region.
Definition at line 151 of file kinematicSingleLayer.H.
Referenced by kinematicSingleLayer::preEvolveRegion(), kinematicSingleLayer::primaryMassTrans(), thermoSingleLayer::Srho(), and thermoSingleLayer::updateSubmodels().
|
protected |
Film mass available for transfer to cloud.
Definition at line 154 of file kinematicSingleLayer.H.
Referenced by kinematicSingleLayer::cloudMassTrans(), kinematicSingleLayer::preEvolveRegion(), thermoSingleLayer::updateSubmodels(), and kinematicSingleLayer::updateSubmodels().
|
protected |
Parcel diameters originating from film to cloud.
Definition at line 157 of file kinematicSingleLayer.H.
Referenced by kinematicSingleLayer::cloudDiameterTrans(), kinematicSingleLayer::preEvolveRegion(), thermoSingleLayer::updateSubmodels(), and kinematicSingleLayer::updateSubmodels().
|
protected |
Momentum [kg/m/s2].
Definition at line 167 of file kinematicSingleLayer.H.
Referenced by kinematicSingleLayer::resetPrimaryRegionSourceTerms(), kinematicSingleLayer::transferPrimaryRegionSourceFields(), and kinematicSingleLayer::USp().
|
protected |
Pressure [Pa].
Definition at line 170 of file kinematicSingleLayer.H.
Referenced by kinematicSingleLayer::pSp(), kinematicSingleLayer::pu(), kinematicSingleLayer::resetPrimaryRegionSourceTerms(), kinematicSingleLayer::transferPrimaryRegionSourceFields(), and thermoSingleLayer::updateSubmodels().
|
protected |
Mass [kg/m2/s].
Definition at line 173 of file kinematicSingleLayer.H.
Referenced by kinematicSingleLayer::deltaMass(), kinematicSingleLayer::resetPrimaryRegionSourceTerms(), kinematicSingleLayer::rhoSp(), kinematicSingleLayer::solveContinuity(), kinematicSingleLayer::transferPrimaryRegionSourceFields(), thermoSingleLayer::updateSubmodels(), and kinematicSingleLayer::updateSubmodels().
|
protected |
Momentum [kg/m/s2].
Definition at line 180 of file kinematicSingleLayer.H.
Referenced by kinematicSingleLayer::resetPrimaryRegionSourceTerms(), kinematicSingleLayer::transferPrimaryRegionSourceFields(), and kinematicSingleLayer::USpPrimary().
|
protected |
Pressure [Pa].
Definition at line 183 of file kinematicSingleLayer.H.
Referenced by kinematicSingleLayer::pSpPrimary(), kinematicSingleLayer::resetPrimaryRegionSourceTerms(), and kinematicSingleLayer::transferPrimaryRegionSourceFields().
|
protected |
Mass [kg/m2/s].
Definition at line 186 of file kinematicSingleLayer.H.
Referenced by kinematicSingleLayer::resetPrimaryRegionSourceTerms(), kinematicSingleLayer::rhoSpPrimary(), and kinematicSingleLayer::transferPrimaryRegionSourceFields().
|
protected |
Velocity [m/s].
Definition at line 193 of file kinematicSingleLayer.H.
Referenced by kinematicSingleLayer::transferPrimaryRegionThermoFields(), and kinematicSingleLayer::UPrimary().
|
protected |
Pressure [Pa].
Definition at line 196 of file kinematicSingleLayer.H.
Referenced by kinematicSingleLayer::pPrimary(), kinematicSingleLayer::pu(), thermoSingleLayer::solveEnergy(), and kinematicSingleLayer::transferPrimaryRegionThermoFields().
|
protected |
Density [kg/m3].
Definition at line 199 of file kinematicSingleLayer.H.
Referenced by kinematicSingleLayer::rhoPrimary(), kinematicSingleLayer::transferPrimaryRegionThermoFields(), and thermoSingleLayer::updateSubmodels().
|
protected |
Viscosity [Pa.s].
Definition at line 202 of file kinematicSingleLayer.H.
Referenced by kinematicSingleLayer::muPrimary(), and kinematicSingleLayer::transferPrimaryRegionThermoFields().
|
protected |
Film thermo model.
Definition at line 208 of file kinematicSingleLayer.H.
Referenced by thermoSingleLayer::correctThermoFields(), kinematicSingleLayer::correctThermoFields(), and kinematicSingleLayer::filmThermo().
|
protected |
Available mass for transfer via sub-models.
Definition at line 211 of file kinematicSingleLayer.H.
Referenced by kinematicSingleLayer::preEvolveRegion(), thermoSingleLayer::updateSubmodels(), and kinematicSingleLayer::updateSubmodels().
|
protected |
Cloud injection.
Definition at line 214 of file kinematicSingleLayer.H.
Referenced by kinematicSingleLayer::info(), kinematicSingleLayer::injection(), thermoSingleLayer::updateSubmodels(), and kinematicSingleLayer::updateSubmodels().
|
protected |
Transfer with the continuous phase.
Definition at line 217 of file kinematicSingleLayer.H.
Referenced by kinematicSingleLayer::info(), kinematicSingleLayer::transfer(), thermoSingleLayer::updateSubmodels(), and kinematicSingleLayer::updateSubmodels().
|
protected |
Turbulence model.
Definition at line 220 of file kinematicSingleLayer.H.
Referenced by kinematicSingleLayer::turbulence(), thermoSingleLayer::updateSubmodels(), kinematicSingleLayer::updateSubmodels(), and kinematicSingleLayer::updateSurfaceVelocities().
|
protected |
List of film forces.
Definition at line 223 of file kinematicSingleLayer.H.
|
protected |
Cumulative mass added via sources [kg].
Definition at line 229 of file kinematicSingleLayer.H.
Referenced by kinematicSingleLayer::info(), and kinematicSingleLayer::transferPrimaryRegionSourceFields().
1.8.17 